X/ZR Cable Gland
CMP Products Cable Gland Main X/ZRData
CMP产品X/ZR电缆密封接头详细信息介绍

 
X/ZR 'Protex' Flameproof EEx d Barrier Type Cable Gland

CMP Type X/ZR Dual Certified Flameproof (Type 'd') and Increased Safety (Type 'e') indoor and outdoor cable gland for use in Zone 1, Zone 2, Zone 21 and Zone 22 Hazardous Areas. Suitable for use with all types of braided or steel tape armour cable providing an environmental seal on the cable outer sheath and a Flameproof compound barrier seal to the cable inner cores. The cable gland also provides electrical continuity via armour termination.

  Technical Data
   Type
   X/ZR Protex
   Design Specification
   BS 6121:Part 1:1989, EN 50262
   ATEX Certification Detail
   SIRA01ATEX1289X
   ATEX Code of Protection Category
   ATEX Ex II 2 GD EEx d IIC & EEx e II, Equipment Zone 1, Zone 2, Zone 21, & Zone 22 - Gas Groups IIA, IIB, IIC
   EN Compliance Standards
   EN 50014:1997, EN 50018:2000, EN 50019:2000, EN 50281-1-1:1998, IEC 60079-0, IEC 60079-1, IEC 60079-7, IEC 61241-1-1
   Australian Approval No.
   ANZEx 03.3000-0
   Australian Code of Protection Category
   DIP A21 IP66, Ex d IIC / Ex e II
   Australian Compliance Standards
   IEC 60079-7:2001, IEC 60079-0:1998, IEC 60079-1:2001, IEC 61241-1-1:1999, IEC 60529:1989
   GOST Ex Certificate
   2002.C256
   GOST Code of Protection Category
   Ex d IIC U / Ex e II U
   GOST Compliance Standards
   GOST P 51330.0-99, GOST P 51330.13-99, GOST P 51330.8-99, GOST P 51330.1-99
   GOST GGTN Permit
   PPC04-6783
   GOST Certificate of Conformity
   5318857
   Lloyds Approval No.
   01/00172
   DNV Approval No.
   E-6157
   ABS Approval No.
   01-LD 234401-PDA
   Continuous Operating Temperature
   -60℃ to +100℃
   Ingress Protection Rating
   IP66
   Standard Cable Gland Material
   Brass
   Alternative Cable Gland Material
   Nickel Plated Brass
   Seal Material
   CMP SOLO LSF / Epoxy Resin Barrier Compound
   Cable Type
   Wire Braid Armour, Screened Flexible Wire Braid (e.g. CY / SY), Steel Tape Armour (STA)
   Armour Clamping
   Three Part Armour Lock
   Sealing Technique
   CMP Unique Displacement Seal Concept
   Sealing Area(s)
   Inner Compound Barrier & Outer Sheath
   Accessories
   Locknut, Shroud, Serrated Washer, Earth Tag, Entry Thread Seal, Adaptor/Reducer

CMP SOLO Option with LSF Shrouds also available

  Additional Information
   Special Conditions For Safe Use ANZEx 03.3000-0
Open Link
   Special Conditions For Safe Use 01ATEX1285X, 01ATEX1289X
Open Link
 
CMP X/ZR Type Cable Gland photograph
   
 
CMP X/ZR Type Cable Gland line diagram
 

Cable Gland Selection Table
             
Gland Size Standard Entry Threads 'C' Minimum Thread Length 'D' Maximum Dia 'A' over Conductors Cable Dia 'B' Braid/STA Thickness Max Across Corners Dia 'E' Max Ordering Reference (Metric) PVC Shroud Ref.
Metric NPT PG Min Max
20S 20 1/2" PG13.5 15 10.4 9.5 15.9 0.8 26.6 20SX/ZR PVC04
20 20 1/2" PG16 15 12.7 12.5 20.9 0.9 33.3 20X/ZR PVC06
25 25 3/4" PG21 15 18.4 17.0 26.2 1.2 40.5 25X/ZR PVC09
32 32 1" PG29 15 24.7 22.9 33.9 1.4 51.0 32X/ZR PVC11
40 40 1-1/4" PG36 15 30.6 26.0 40.4 1.4 61.0 40X/ZR PVC15
50S 50 1-1/2" PG36 15 36.6 35.0 46.7 1.4 66.5 50SX/ZR PVC18
50 50 2" PG42 15 42.5 38.0 53.1 1.4 78.6 50X/ZR PVC21
63S 63 2" PG48 15 47.5 45.6 59.4 1.5 83.2 63SX/ZR PVC23
63 63 2-1/2" - 15 53.4 54.6 65.9 1.5 89.0 63X/ZR PVC25
75S 75 2-1/2" - 15 59.4 57.0 72.1 1.5 101.6 75SX/ZR PVC28
75 75 3" - 15 65.4 60.4 78.5 1.5 111.1 75X/ZR PVC30
All dimensions are in millimetres unless otherwise stated
 
 

More information related to these cable glands is available from CMP Products main website.

More info on CMP Products X/ZR cable gland