T3CDS Cable Gland
CMP Products Cable Gland Main T3CDS Data
CMP产品T3CDS电缆密封接头详细信息介绍

 
Triton CDS Flameproof EEx d and Increased Safety EEx e Cable Gland

Triton CDS (T3CDS) Flameproof type d and Increased Safety type e brass cable gland for all types of armoured & braided cables including lead sheathed versions, providing a flameproof seal on the cable inner sheath and an environmental seal on the cable outer sheath. Also equipped with an integral Deluge Protection seal to prevent premature armour corrosion and a unique Reversible Armour Cone and Clamping Ring arrangement. The Cable Gland provides electrical continuity via armour termination. Suitable for use in Zone 1, Zone 2, Zone 21 and Zone 22 Hazardous Areas.

  Technical Data
   Type
   T3CDS
   Design Specification
   BS 6121:Part 1:1989, EN 50262, UL 514B
   ATEX Certification Detail
   SIRA00ATEX1148X
   ATEX Code of Protection Category
   ATEX Ex II 2 GD EEx d IIC & EEx e II, Equipment Zone 1, Zone 2, Zone 21, & Zone 22 - Gas Groups IIA, IIB, IIC
   EN Compliance Standards
   EN 50014:1997, EN 50018:1994, EN 50019:1994, EN 50281-1-1:1998, IEC 60079-0, IEC 60079-1, IEC 60079-7, IEC 61241-1-1
   CSA Approval Certificate No.
   1310517
   CSA Code of Protection Category
   Ex d IIC Ex e II, Class I, II, III, Class II Div 2 Groups EFG, Enclosure Type 3, 4 and 4X, Class I Div 2 Groups ABCD, Class III
   CSA Compliance Standards
   CSA C22.2 No. 174-M1984, CSA C22.2 No. 25-1966, CAN/CSA-C22.2 No. 18-92, CAN/CSA-C22.2 No. 94-M91, CAN/CSA-E60079-0-2001, IEC 60079-0 1998, CAN/CSA-E79-7-95
   UL Listing File No.
   E200163
   UL Code of Protection Category
   Ordinary & Wet Locations
   UL Compliance Standards
   UL 514B
   Australian Approval No.
   ANZEx 03.3001-0X
   Australian Code of Protection Category
   DIP A21 IP66/IP68, Ex d IIC / Ex e II
   Australian Compliance Standards
   IEC 60079-7:2001, IEC 61241-1-1:1999, IEC 60529:1989, IEC 60079-1:2001, IEC 60079-0:1998
   GOST Ex Certificate
   2002.C256
   GOST Code of Protection Category
   Ex d IIC U / Ex e II U
   GOST Compliance Standards
   GOST P 51330.13-99, GOST P 51330.0-99, GOST P 51330.8-99, GOST P 51330.1-99
   GOST GGTN Permit
   PPC04-6783
   GOST Certificate of Conformity
   5318857
   Lloyds Approval No.
   01/00172
   DNV Approval No.
   E-6157
   ABS Approval No.
   01-LD 234401-PDA
   Continuous Operating Temperature
   -60℃ to +130℃
   Ingress Protection Rating
   IP66, IP67, IP68
   Deluge Protection Compliance
   DTS01 : 91
   Deluge Protection Document
   ITS 01005029 - D
   Standard Cable Gland Material
   Brass
   Alternative Cable Gland Material
   Aluminium, Nickel Plated Brass, Stainless Steel
   Seal Material
   CMP SOLO LSF
   Cable Type
   Aluminium Wire Armour (AWA), Steel Tape Armour (STA), Armored & Jacketed, Single Wire Armour (SWA), Wire Braid Armour, Aluminium Strip Armour (ASA), Screened Flexible Wire Braid (e.g. CY / SY)
   Armour Clamping
   Reversible Armour Clamping Cone & Bi-directional Clamping Ring
   Sealing Technique
   CMP Unique CDS System
   Sealing Area(s)
   Inner & Outer Sheath
   Accessories
   Serrated Washer, Locknut, Shroud, Earth Tag, Entry Thread Seal, Adaptor/Reducer



  Additional Information
   UBWE.E200163 - Shipboard Cable Fittings, Marine
Open Link
   Triton CDS VRML Animation with HTML Control Interface
Open Link
   Triton CDS VRML Animation with Cortona Controls
Open Link
   Triton CDS In Depth Features, Benefits, Application & Installation Information
Open Link
   Special Conditions For Safe Use 00ATEX1148X, ANZEx 03.3001-0X
Open Link
   CMP Products UL Listings Summary
Open Link
   Triton CDS Animated Video Clip - 2D Effect on Small Cable
Open File
   Triton CDS Animated Video Clip - 2D Effect on Large Cable
Open File
   Triton CDS 3D Animated Video Clip - Full Assembly
Open File



 
CMP T3CDS Type Cable Gland photograph
   
 
CMP T3CDS Type Cable Gland line diagram
 

Cable Gland Selection Table
                             
Gland Size Entry Threads Min Entry Thread Length Seal Ranges Armour Range Ordering Reference
Standard Optional Under Armour Cable Diameter Overall Cable Diameter Grooved Cone Plain Cone
Metric NPT PG Min Max Min Max Min Max Min Max
20/16 20 1/2" PG 11 15 3.1 8.6 6.0 13.4 0 1.0 0.9 1.0 2016/T3/CDS
20S 20 1/2" PG 11 15 6.1 11.6 9.5 15.9 0 1.0 0.9 1.25 20S/T3/CDS
20 20 1/2" PG 16 15 6.5 13.9 12.5 20.9 0 1.0 0.9 1.25 20/T3/CDS
25 25 3/4" PG 21 15 11.1 19.9 18.0 26.2 0 1.0 1.25 1.6 25/T3/CDS
25S 25 3/4" PG 21 15 11.1 19.9 14.0 22.0 0 1.0 1.25 1.6 25S/T3/CDS
32 32 1" PG 29 15 17.0 26.2 22.9 33.9 0 1.0 1.6 2.0 32/T3/CDS
40 40 1-1/4" PG 36 15 22.0 32.1 26.0 40.4 0 1.0 1.6 2.0 40/T3/CDS
50S 50 1-1/2" PG 36 15 29.5 38.1 35.0 46.7 0 1.0 2.0 2.5 50S/T3/CDS
50 50 2" PG 42 15 35.6 44.0 38.0 53.1 0 1.0 2.0 2.5 50/T3/CDS
63S 63 2" PG 48 15 40.1 49.9 45.6 59.4 0 1.0 2.5 2.5 63S/T3/CDS
63 63 2-1/2" - 15 47.2 55.9 54.6 65.9 0 1.0 2.5 2.5 63/T3/CDS
75S 75 2 1/2" - 15 52.8 61.9 57.0 72.1 0 1.0 2.5 2.5 75S/T3/CDS
75 75 3" - 15 59.1 67.9 60.4 78.5 0 1.0 2.5 2.5 75/T3/CDS
90 90 3-1/2" - 15 66.6 79.3 69.2 90.4 0 1.6 3.15 3.15 90/T3/CDS
100 100 4" - 24 80.0 90.9 91.0 101.4 0 1.6 3.15 4.0 100/T3/CDS
115 115 4-1/2" - 24 90.0 97.9 101.3 110.0 - - 3.15 4.0 115/T3/CDS
130 130 5" - 24 100.0 114.9 114.0 123.0 - - 3.15 4.0 130/T3/CDS
All dimensions are in millimetres unless otherwise stated
 
 

More information related to these cable glands is available from CMP Products main website.

More info on CMP Products T3CDS cable gland