CMP Products - Cable Glands are our Business - Hazardous Area, Marine & Industrial

Protex 2000 (PX2KPB) Flameproof EEx d Cable Gland

CMP Type PX2KPB Dual Certified Flameproof (Type 'd') and Increased Safety (Type 'e') Cable Gland for all types of Armoured Cables providing an inner Flameproof compound barrier seal around the individual cable cores and an environmental seal on the cable outer sheath. Also equipped with an integral Deluge Protection seal to prevent premature armour corrosion and an armour clamping facility suitable for Steel Wire Armour, Braided or Steel Tape Armour Type Cables. The cable gland also provides electrical continuity via armour termination & earth bonding of Lead Sheath. Suitable for use in Zone 1, Zone 2, Zone 21 and Zone 22 Hazardous Areas.

Technical Data

Type

PX2KPB (PX2KXPB & PX2KWPB)

Design Specification

BS 6121:Part 1:1989, EN 50262

ATEX Certification Detail

SIRA01ATEX1285X

ATEX Code of Protection Category

ATEX Ex II 2 GD EEx d IIC & EEx e II, Component Zone 1, Zone 2, Zone 21, & Zone 22 - Gas Groups IIA, IIB, IIC

EN Compliance Standards

EN 50014:1997, EN 50018:2000, EN 50019:2000, EN 50281-1-1:1998, IEC 60079-0, IEC 60079-1, IEC 60079-7, IEC 61241-1-1

GOST Ex Certificate

2002.C256

GOST Code of Protection Category

Ex d IIC U / Ex e II U

GOST Compliance Standards

GOST P 51330.1-99, GOST P 51330.8-99, GOST P 51330.13-99, GOST P 51330.0-99

GOST GGTN Permit

PPC04-6783

GOST Certificate of Conformity

5318857

Lloyds Approval No.

01/00172

DNV Approval No.

E-6157

ABS Approval No.

01-LD 234401-PDA

Ingress Protection Rating

IP66, IP67, IP68

Ingress Protection Document

5046 C549G

Deluge Protection Compliance

DTS01 : 91

Deluge Protection Document

5046 C549G-D

Standard Cable Gland Material

Brass

Alternative Cable Gland Material

Nickel Plated Brass, Stainless Steel

Seal Material

CMP SOLO LSF / Epoxy Resin Barrier Compound

Cable Type

Lead Sheathed & Single Wire Armour (LC/SWA), Lead Sheathed & Wire Braid Armour, Lead Sheathed & Steel Tape Armour (LC/STA)

Armour Clamping

Disconnectable - Loose Cone & Ring

Sealing Technique

CMP Unique Displacement Seal Concept

Sealing Area(s)

Inner Compound Barrier & Outer Sheath

Accessories

Shroud, Adaptor/Reducer, Locknut, Serrated Washer, Earth Tag, Entry Thread Seal

# When ordering please select the cable gland type PX2KWPB for SWA, or PX2KXPB for Braided, Tape Armour & Strip Armour Cables from the table below.

CMP PX2KPB Type Cable Gland line diagram

Cable Gland Selection Table

Gland Size	Entry Threads 'C'			Min. Thread Length 'D'	Compound & Seal Ranges			Armour Range				Max. Across Corners 'E'	Ordering Reference #
	Optional	Standard			Dia Over Conductors 'A'	+ Cable Diameter 'B'		Grooved Cone		Plain Cone
	Metric	NPT	PG		Max.	Min.	Max.	Min.	Max.	Min.	Max.
20/16	20	1/2"	PG11	15	12.6	7.0	13.4	0	1.0	0.9	1.25	26.6	20/16PX2KX(W)PB
20S	20	1/2"	PG13.5	15	12.6	9.5	15.9	0	1.0	0.9	1.25	26.6	20SPX2KX(W)PB
20	20	1/2"	PG16	15	12.6	12.5	20.9	0	1.0	0.9	1.25	33.3	20PX2KX(W)PB
25S	25	3/4"	PG21	15	17.5	14.0	22.0	0	1.0	1.25	1.6	40.5	25SPX2KX(W)PB
25	25	3/4"	PG21	15	17.5	18.0	26.2	0	1.0	1.25	1.6	40.5	25PX2KX(W)PB
32	32	1"	PG29	15	23.6	22.9	33.9	0	1.0	1.6	2.0	51.0	32PX2KX(W)PB
40	40	1-1/4"	PG36	15	30.0	26.0	40.4	0	1.0	1.6	2.0	61.0	40PX2KX(W)PB
50S	50	1-1/2"	PG36	15	36.6	35.0	46.7	0	1.0	2.0	2.5	66.5	50SPX2KX(W)PB
50	50	2"	PG42	15	41.0	38.0	53.1	0	1.0	2.0	2.5	78.6	50PX2KX(W)PB
63S	63	2"	PG48	15	47.9	45.6	59.4	0	1.0	2.5	2.5	83.2	63SPX2KX(W)PB
63	63	2-1/2"	-	15	53.7	54.6	65.9	0	1.0	2.5	2.5	89.0	63PX2KX(W)PB
75S	75	2-1/2"	-	15	59.9	57.0	72.1	0	1.0	2.5	2.5	101.6	75SPX2KX(W)PB
75	75	3"	-	15	64.3	60.4	78.5	0	1.0	2.5	2.5	111.1	75PX2KX(W)PB
90	90	3"	-	20	75.7	69.2	90.4	0	1.6	3.15	3.15	128.6	90PX2KX(W)PB
All dimensions are in millimetres unless otherwise stated

More information related to these cable glands is available from CMP Products main website.

More info on CMP Products PX2KPB cable gland